Discount Air Tools Center

Milwaukee 7120-21 3/4- to 1-3/4-Inch Coil Roofing Nailer

At the top of our list is how incredibly light Milwaukee’s nailers are, even fully loaded, and their compact size makes them a cinch to tote and use, especially in awkward positions. But a close second is the clever inclusion of a magnet that holds onto the nails as you’re loading and significantly speeds up the process, reducing fumbling and dropped fasteners. Another big tip of the hat to Milwaukee for incorporating both sequential and bump firing modes, accessible just by turning a knob, so when speed is a need, you’re ready to go, but precision is at your fingertips too. We like the quality built into this tool, from the magnesium housing to the rugged rubber bumper guard that protects your investment should the tool take a fall. The hassle-free replaceable nosepiece has hard-wearing carbide inserts, and there’s even a self-cleaning air filter in the tool handle, keeping dust and dirt out of the tool’s workings – and that means longer tool life. The shingle guide is a handy touch, and we like that it’s easily removed when it’s not needed.

In hand, this nailer feels great: light, comfortable, agile, and beautifully balanced. Loading fasteners is a breeze, depth adjustment is on-the-mark reliable, tool-free, fast and easy, and we couldn’t get the thing to jam. Roofers and contractors will love this nailer. --Kris Jensen-Van Heste

Amazon.com Product Description
Milwaukee’s 7120-21 Coil Roofing Nailer features an ultra lightweight magnesium housing that helps to minimize fatigue, and their compact size offers greater maneuverability. The Load-N-Go™ magazine holds 120 galvanized wire collated nails from 3/4 in. to 1-3/4 in. length and .120 in. diameter, and a magnet holds the nails in place for fast, efficient loading. A thick rubber guards minimize housing damage in case of a drop. The tool-free depth-of-drive adjustment gives you precise depth control and protects against overdriving nails. The in-handle self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable air deflector with muffler directs exhaust away from the work area and holds down the noise. The textured selectable trigger lets you move from sequential or contact actuation by simply turning a knob. This nailer features a replaceable nosepiece with carbide inserts for easy maintenance and extended tool life and a removable shingle guide to assist in quick shingle alignment. Also features an internal piston catch for consistent driving power, plus a rubber over-molded handle and trigger.

Technical Details
PSI 70 to 120; 15-degree collation angle; air consumption .08 ft3 /cycle at 100 PSI; air inlet 3/8" NPT; magazine capacity 120; net weight 5.2 lbs.

What's in the Box
7120-21 Coil Roofing Nailer, safety glasses, 2 oz oil, 4mm hex wrench, carrying case.

Applications
Asphalt and fiberglass shingles, waterproof tar paper, roofing felt, fire wall (exterior gypsum board), house wrap, cement board, insulation board, metal drip edges, siding, vapor barrier, upholstery trim panels.
List Price: $570.00
Our Price: $149.99
More Info!

Ingersoll-Rand 231C 1/2-Inch Super Duty Air Impact Wrench

Twin Hammer Plus and 425 ft./lbs. of Torque Deliver Efficient Performance
Whether you're a vehicle hobbyist or professional mechanic, the 231C can help simplify jobs like rotating tires or performing basic vehicle maintenance. It comes equipped with an exclusive Twin Hammer Plus impact mechanism for 1/2-inch drive, and it boasts an average air consumption of 4.2 CFM. And whether you're removing lug nuts or stubborn bolts, pressure-feed lubrication ensures ease of use.

This compact tool delivers a maximum torque of 425 ft./lbs. and provides an impressive speed of 8,000 RPM (1,200 BPM) for fast, efficient performance.

Adjustable Power Regulator for Optimum Results
To help maintain consistent results, the 231C's adjustable power regulator provides variable power in one direction and full power in the opposite direction, which gives you the freedom to set the power independently.

Compact and Lightweight for All-Day Use
Measuring only 7.2 inches in length and weighing just 5.3 pounds, the 231C is compact and lightweight enough to minimize stress on your wrists and hands. It's also easy to take with you as you move around the shop or jobsite.

Caring for the 231C is as simple as can be thanks to the easy-to-service, two-piece construction and the contoured handle that ensures comfort and control, even during all-day jobs.

For added convenience, the 231C arrives fully lubricated and ready to go right out of the box.

Ingersoll Rand: Getting Things Done
Part of the larger Ingersoll Rand Corporation, a $13 billion global company with a 100-year tradition of technological innovation, Ingersoll Rand provides affordable products, services, and solutions that enhance energy efficiency, productivity, and operations. Its diverse and innovative products range from complete compressed air systems, tools, and pumps to material and fluid handling systems to environmentally friendly microturbines.

What's in the Box
231C Impact Wrench and instruction manual.

List Price: $262.20
Our Price: $89.99
More Info!

Wagner Power Products 272909 Piston Repair Kit

What's in the Box
Piston, spring, and atomizer valve.
List Price: $26.99
Our Price: $14.79
More Info!

DEWALT D55140 Heavy-Duty 1 Gallon 135 PSI Max Trim Compressor

You can count on the durability of this unit with exclusive DeWalt details like an oil-free, long-life pump, which ensures smooth, maintenance-free operation that never results in oil spilled on sensitive work surfaces, and a ball drain valve that makes tank draining quick and easy. Cast-iron construction, a thoughtful roll-cage design, and a wrap-around control panel protect important compressor components from being damaged while you work. And at just 24 pounds and nine inches wide with a convenient cord wrap, this compact unit is easy to carry and store. This compressor is backed by a full 1-year warranty.
List Price: $292.02
Our Price: $139.99
More Info!

Makita MAC2400 Big Bore 2.5 HP Air Compressor

2.5 HP with Big Bore Engineered Pump
The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors

List Price: $493.60
Our Price: $319.99
More Info!

Makita MAC700 Big Bore 2.0 HP Air Compressor

There are three factors that made us form this opinion. First, it’s the quietest compressor we’ve ever encountered. It’s a remarkable departure in a genre of tools that normally force you to suspend conversation while it’s cycling. The MAC700 puts out 80 decibels, according to the folks at Makita, and when you compare that to the 90 and up you get from most units, that’s practically a hum. So we like this for household use, especially in a basement shop.

Next on our list of pluses for the DIY-er is the low-amp draw, and with that, fewer trips to the breaker box and less chance of premature motor failure. The other feature that won us over is the easy-on-the-hand lever handle ball valve that saves your knuckles when you drain the tank. It’s also got a really fast cycle, so by the time you take a sip of water, you’re ready to work again.

It’s made like a champ, with a roll-bar handle that protects your investment, a cast-iron cylinder for durability and an oil sight glass that makes maintenance a breeze.--Kris Jensen-Van Heste

What’s in the Box
Oiled single hot dog compressor with handle; 1/4-inch brass Makita universal coupler

Makita's 2.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output, less noise and improved job site performance. The MAC700 delivers industrial power and results with improved durability under tough job site conditions.

2.0 HP with Big Bore Engineered Pump
The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC700 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 2.6-gallon tank sustains an operating pressure of 130 PSI, and delivers 40PSI (3.8 CFM) and 90 PSI (3.3 CFM). The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC700 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors

List Price: $323.40
Our Price: $214.43
More Info!

DEWALT D55141FNBN Heavy-Duty 16-Gauge Finish Nailer/18-Gauge Brad Nail

Featuring a two-gallon tank and the ability to deliver 2.0 SCFM at 90 PSI and a maximum of 150 PSI, the compressor included in this kit is powerful enough to run both of these nailers at the same time, with dual quick couplers to make set up easy. And at just 79dBA, it is surprisingly quiet. You can count on its durability with details like an oil-free, long-life pump, which ensures smooth, maintenance-free operation that never results in oil spilled on sensitive work surfaces, a high-flow regulator, an easy-to-use ball valve drain, and a thoughtful roll-cage design that prevents damage to critical compressor parts. At just 30 pounds and 10.5 inches wide with a convenient cord-wrap feature, this compact unit is easy to move around the jobsite and to store. These DeWalt tools are backed by a full 1-year warranty.
List Price: $516.12
Our Price: $302.13
More Info!